Slick 50 Engine Treatment is suitable for petrol and diesel engines
Slick 50 Engine Treatments helps protect the engine against friction and heat over successive oil changes, during tough stop-go driving, high temperature and high stress conditions. Helps extend engine durability with the following features:
• Proprietary friction modifier creates enhanced layer of lubrication to minimize heat produced by friction in the engine
• Anti-wear agent forms a self-generating protective surface between metal engine parts to prevent metals from grating together.
• Dispersant helps keep engine clean by preventing the build-up of sludge and deposits on engine parts.
Compatible with all major types of mineral and semi-synthetic motor oil. Available in 500 ml (for engines up to 1400 cc) and 750 ml (for engines up to 3000 cc) bottles.
This enhanced semi-synthetic engine oil meets API SM/CF requirements to better ensure your oil change is NOT diluted.
Instructions: Pour directly into the engine. Do not overfill. If carrying out a full oil and filter change drain oil and fit new oil filter. Refill with motor oil, replacing 500 ml of oil with 500 ml of SLICK 50 Engine Treatment. Check oil level. Use at every oil change for maximum effectiveness or at least every 12, 500miles / 20,000 km.
|Engine Size||Slick 50 Usage|
|Up to 375cc||250ml (Small motorcycles, garden equipment)|
|375cc – 750cc||350ml (Medium sized motorcycles)|
|750cc – 1500cc||500ml (Larger motorcycles)|
|1500cc – 3 Litres||750ml (As above)|
|3 Litres – 5 Litres||1 Litre (As above)|
|Over 5 litres||20% of total lubricant requirement|
Important: Always replace oil and filters in accordance with manufacturers’ recommendations. Please dispose of oil at an approved disposal or recycling facility. Wash thoroughly after contact.
Watch our Slick 50 Engine Treatment video to see how this will protect your engine, and for information on how to use this product:
©2018 Kraco Car Care International Ltd. • Slick 50 is a trademark of ITW Global Brands and/or its affiliates